Community > Article > Detail RETURN

Standard Setting of Tampon Machine

# tampon machine

This standard is formulated according to the technical requirements put forward by users and with reference to the product standards of leading manufacturers in the world. The purpose of this standard is to reasonably specify the test methods and technical parameters of tampon machine, so as to facilitate the production, trade and use of tampon machine.

Formulation requirements of tampon machine


This standard specifies the requirements, test methods, inspection rules, marks, packaging, transportation and storage of tampon machine.

Tampon equipment is applicable to material conveying equipment such as ports and.

Standardization of referenced documents

The following documents are essential for the application of this document. This document applies only to all references dated. This document is applicable to the latest edition of undated references (including all modification tables).

GB / t191-2008 packaging, storage and transportation Icon

GB/T2828. 1-2003 sampling inspection procedures by attributes Part 1: batch by batch sampling plan retrieved by acceptance quality limit (AQL)

GB / t2829-2002 sampling procedures and tables for periodic inspection by attributes (applicable to the stability of inspection process)

GB / t14253-2008 general technical conditions for light industrial machinery


(1) Power supply: 380V, 50Hz

(2) Installed power (excluding rubber machine and air compressor): 150KW (for reference)

(3) Production speed: ≥ 600 tablets for 1 minute

(4) Qualified rate: ≥ 95%

(5) Overall dimension (m): 25x5x3 3 (length x width x height) (for reference)

Test method

Test method according to GB / t14253-2008 general technical conditions of light industrial machinery.


Inspection rules of tampon machine

(1) Inspection classification

Products are divided into handover inspection and routine inspection.

(2) Inspection department

The quality inspection department of the company conducts handover inspection and routine inspection.

(3) Inspection lot

Products with the same material number and the same model or products with the same batch number are inspection batches.

(4) Test sample

The unit of inspection sample is single product.

(5) Routine inspection cycle

Routine tampon machine inspection shall be conducted once a year: routine inspection shall be conducted when the main process, main raw materials, main equipment and production are restored for more than half a year. The inspection is divided into delivery inspection and type inspection.

(6) Delivery inspection

Tampon machine must pass the inspection of the company's quality inspection department before leaving the factory, and the product certificate must be attached.

(7) Type inspection

Type inspection shall be carried out under any of the following circumstances:

When the tampon machine molding, equipment structure, material and process change greatly; The national quality supervision and inspection institution resumes production after it may affect the performance of the equipment and stops production for more than one year; The national quality supervision and inspection institution puts forward the requirements for type inspection.

Type inspection shall include all technical requirements of this standard.


Take a type inspection sample from the equipment passing the factory inspection.

Decision rule

The type inspection results must meet the requirements of this standard. If there are unqualified items, it is allowed to extract double quantity of products to recheck the unqualified items. If it is still unqualified, it is determined that tampon equipment is unqualified.


Marking, packaging, transportation and storage of tampon machine


The following contents shall be marked on the packaging box of tampon machine:

(1) Company name and trademark

(2) Standard number

(3) Product name

(4) Model

(5) Production batch number or production date.

(6) G / T1 stipulates that they are afraid of rain and fragile.

(7) Limit the number of layers


Kraft paper lined with plastic film is generally used for outer packaging. Plastic film can be packaged according to user requirements or other packaging forms, but the product should avoid internal shaking.

The packing quantity of each box varies with the product model, but the overall requirements are consistent with the quantity of goods.

Quality certificate documents shall be provided for each box, and the name or code of tampon machine inspector, auditor and approver shall be indicated.


The product can be transported by any means, but it shall not be subject to rain, damage of packing box and violent vibration during transportation.


Tightly packed products should be stored in a dry, non corrosive gas and ventilation room to avoid moisture and mixing with other substances.


Through the specific analysis of tampon machine's formulation standards, it can better serve the production.


You can comment after