Community > Article > Detail RETURN

What Needs to Be Done for the Maintenance of Three-dimensional Guard Sanitary Napkin Machine?

At present, the maintenance of three-dimensional guard sanitary napkin machine is a very complex work, and many equipment maintenance personnel do not understand or pay enough attention to many problems. Here, we again promote the maintenance of three-dimensional guard sanitary napkin equipment.

 

 

1.Routine maintenance of three-dimensional guard sanitary napkin machine

The routine maintenance of three-dimensional guard sanitary napkin machine seems simple, but it is often ignored and most likely to be ignored; But most of the time, big problems are often accumulated by small problems. Keep the surface of the instrument clean, check whether the voltage and power supply are normal, observe whether the function of the instrument is normal, and fill in the use record. Develop good habits in daily maintenance to avoid damage events.

 

2.Maintenance of three-dimensional guard sanitary napkin machine

In case of failure of three-dimensional guard sanitary napkin machine, information shall be collected and prepared before maintenance; Including model, factory number, failure time, whether there is abnormal sound, whether there is sudden power failure, whether the instrument moves, etc. During maintenance, pay attention to the sequence and do not use brute force to forcibly disassemble. The removed fastening screws and small parts shall not be placed at will, but shall be placed in categories to avoid loss. After the equipment is repaired and installed, it shall be gradually restored to the original state in the reverse order without redundant accessories. Damaged parts shall also be marked, and they shall be restored to the original state after replacement without error.

After maintenance, clean the surface of the instrument and turn on the power to see whether it can work normally. Calibrate the instrument and restore it to the normal working state, and then give it to the user for trial. Check whether the three-dimensional guard sanitary napkin machine returns to the original working state to avoid hidden dangers. Finally, clean up the site, check whether there are missing tools, and fill in the maintenance log for inspection. Maintenance engineers should always pay attention to protection when repairing instruments, whether it is leakage or cross infection. Unnecessary accidental injury.

 

3.Regular maintenance and inspection of three-dimensional guard sanitary napkin machine

First, check whether the button, switch connector and socket of the instrument are loose and dislocated, whether the plug and socket are oxidized, corroded or in poor contact, whether the power line is aging, whether the heat dissipation and exhaust are normal, and whether the grounding connection and pipeline connection are good. Clean the surface, internal electrical parts and mechanical parts of the instrument, including cleaning the filter screen and relevant pipes, and cleaning the relevant plugs and sockets of the instrument to prevent poor contact and lubrication of necessary mechanical parts.

Timely replace the accessories that meet the service life, performance degradation and do not meet the requirements, and replace them regularly as specified in the instruction manual, so as to prevent possible failure expansion or complete machine failure. For insufficient battery charging, relevant personnel shall charge regularly to eliminate obvious and potential faults of three-dimensional guard sanitary napkin machine. Check whether each indicator light and indicator are normal, adjust and set each switch and button, enter each function setting, and check whether the basic function of the equipment is normal. Check whether the alarm function of the equipment is normal through simulation test.

 

Therefore, the technical conditions of three-dimensional guard sanitary napkin machine should be mastered timely and accurately to achieve the purpose of maintaining and improving equipment performance, investigating hidden dangers, preventing accidents, reducing downtime and ensuring normal production.

Comment(0)

You can comment after

SIGN IN

Author

yvette

Articles

6

Views

141

Supports

0

0

0