1. Purchase raw materials at the raw material factory
2. Purchase of paper extraction production equipment
3. Use the paper extractor for paper beating (folding forming), the large rotary paper cutter for size cutting, and the three-dimensional packaging machine for packaging. After that, you can bag manually or purchase equipment for automatic middle packing!
1. Cutting trees for materials 2 Cut to proper length 3 Make pulp with liquid medicine and steam 4 Peel off the bark 5 Cut into pieces 6 The flakes are centrally processed and transported to the paper mill 7 Rinse with liquid medicine 8 Remove impurities 9 Bleached pulp 10 Slice 11 Add liquid medicine to the pulp 12 Dry the water at high temperature 13 Drain the water with a net 14 Put it on the felt to absorb water 15 Calendering with calender 16 Make a paper roll 17, cut it into boxed paper, and 18 is boxed
The paper drawing machine will cut the base paper, that is, the paper tray, by the knife roller, and fold it alternately into hinged rectangular paper stacking. The cut paper tray will be processed and folded into face towel paper. After packaging, it will become the paper drawing of the finished product. With automatic paper cutting, automatic embossing and edge embossing, automatic technology, automatic dislocation counting, convenient packaging.
The raw material used in paper extraction processing is called paper tray, which is cut by large axis paper. First, the paper tray is rewound, cut and folded by the paper extraction machine. The extracted paper is V-shaped cross, and it is already a semi-finished product.
Then use the soft draw flat ironing packaging machine to bag it and scald both sides. The finished product is the draw paper packed in the plastic bag we usually use.
As a matter of fact, the raw material paper of the suction paper towel is the same as that of the toilet paper rewinder. Let's first understand how the following base paper is produced: the waste paper enters the hydraulic pulper, which pulps and deinks the waste paper, and the pulp after pulping and deinking flows into the pulp tank; The pulp is lifted from the pulp tank into the high-frequency vibrating screen by the pulp lifting pump, which plays the role of screening and separating sundries.
After screening, it flows into the pulp tank, and then is lifted into the rinsing machine by the pulp pump to wash the pulp clean and bleach; After bleaching, it will automatically flow into the pulp tank; Then, the slurry is lifted into the refiner. After the slurry is ground into fine slurry, it will automatically flow into the slurry tank, and then lifted into the sand tray by the slurry pump. The function of the sand tray is to separate the sediment of sand ash and other impurities, and then make pure slurry.
Then it is lifted into the slurry stabilization box by the desilting pump. The function of the slurry stabilization box is to adjust the concentration of the slurry. After that, it automatically flows into the mesh tank, and then the slurry is brought into the drying cylinder by the mesh cage blanket. (the drying cylinder is used for drying) and then the finished base paper is fed in.